Glass Thickness
Coated Glass
Minimum Dimension
Maximum Dimension
TEMPERING - HEAT TREATMENT
5mm to 12mm
5mm to 10mm
400mm diagonal
7000mm x 3300mm
3/16” to 1/2”\
3/16” to 3/8”
16” diagonal
275”x130”
GLASS CUTTING
Thickness
Minimum Dimension
Maximum Dimension
Maximum Weight
Shape
Tolerance
2.3mm to 25mm
100mm x 100mm
6096mm x 3300mm
1260Kg
Multiple standard catalog shape
±0.5mm
Single to 1″
4” x4”
240” x 130”
2775Lbs
±1/32”
CNC FABRICATION
Thickness
Minimum Dimension
Maximum Dimension
Maximum Weight
Shape
Tolerance
2.3mm to 25mm
350mm x 180mm
6096mm x 3300mm
600Kg
Multiple standard catalog shape
±0.5mm
Single to 1″
14” x 7”
240” x 130”
2100Lbs
±1/32”
SINGLE EDGE POLISHER
Thickness
Minimum Dimension
Maximum Dimension
Maximum Weight
Maximum Linear Weight
Shape
Tolerance
2.3mm to 100mm
350mm x 180mm
6096mm x 3300mm
600Kg
350Kg/m
Straight line shapes
±0.5mm
Single to 4″
14” x 7”
240” x 130”
2100Lbs
235Lbs/ft
±1/16″
INSULATED GLASS LINE
Overall Thickness
Configuration
Maximum thickness for middle lite
Minimum Dimension
Maximum Dimensions with gas
Maximum Weight
Linear Maximum Weight
Steps
Gas
Sealant
Spacer
12mm to 90mm
Double or triple insulated
6mm
350mm x 180mm
6000mm x 3300mm
2500Kg
200Kg/m
Side 1 – 85mm
Side 2, 3, 4 – No size limit
Argon available for all units
Momentive silicone IGS-3723 blk or gry
All spacers are bent, no corner key
Aluminum natural
Aluminum black
Stainless steel natural
Stainless steel black
1/2″ to 3-1/2”
1/4″
14” x 7”
236” x 130”
5500Lbs
134Lbs/ft
8, 10, 12, 15, 16, 18, 20mm
8, 10, 12, 15, 16, 18, 20mm
10, 12, 15, 18mm
10, 12, 15, 18mm
LAMINATION CLEAN ROOM
Thickness
Minimum Dimension
Maximum Dimension
Maximum Weight
6mm to 100mm
100mm x 100mm
6096mm x 3300mm
2500Kg
4” x 4”
240” x 130”
2100Lbs
HEAT SOAK TESTING
Thickness
Maximum Dimension
Heat Soak Standard
5mm to 25mm
7000mm x 3300mm
ISO 20657 Third party certified
3/16” to 1”
275” x 130”
DIP-TECH NERAD
- Maximum Panel Size: 3.3 x 7.5 m (130 x 300in)
- (heat treatment limit)
- Glass Thickness: 5 to 19mm
- Recommended Substrate: Extra-clear (low iron),
- Glass Ceramic ink is fused into glass during the tempering process
QUALITY CONTROL
All of our heat treated glass is analysed for localised distortion. We are able to measure the distortion, or curvature of the glass. This measurement is made in (milli) diopters and can calculate the traditional peak to valley and edge curl values.
The distortion measurements are displayed as a colour map of the entire sheet that can then be manipulated for better viewing or further analysis. We set up pass/fail optical power values that are applied to individual glass lites.